STANDARD TECHNICAL SPECIFICATIONS ULTRACT SERVOMOTORS

Type
Permanent magnet servomotors at low inertia and high torsion stiffness

Rotor
With sintered rare earth permanent magnets, mechanic assembly, no gluing

Insulation
– Class F motor according to DIN 0530
– Class H windingaccording to DIN 0530
– Special isolation for high frequency assuring a reliable operation even in presence of reflection on the motor feeding wires

Thermal protection
Built-in by means of PTC a 130°C

Bearings
Heavy duty range, lubricated to last for 30.000 h; for the 03 – 04 – 05 – 07 sizes they are assembled in aluminium seats, for the 10 – 13 sizes, in cast-iron seats

Balancing
R Degree(reduced tolerance)

Concentricity and perpendicularity axis/flange
R Degree (reduced tolerance) according to IEC 72 – DIN 0530

Shatf end
Smooth, j6 degree with coaxial threaded screw, for assembly by means of conical fitting

Cooling
IC0041 natural convection
10 – 13 sizes, frequently used in flow process, they are available also as servoventilated versioncwith fan operated in case of overtemperature. The forced circulation is processed in dual chamber over the frame, thus preserving the IP54 protection

Running position
Any

Assembly
B5 flange

Winding capacitance/earth
Minimized to optimise the EMC features

Protection
IP54

Seek sensor
The shaft is pre-arranged to fit the most widely spread control systems on the market – to be agreed at the order

ULTRACT

CORRELATED PAGES

ULTRACT

TECHNICAL DATA SHEET

————————————————————-
————————————————————-
————————————————————-

pdfOverall dimensions and safe operating areas – UL04

————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-
————————————————————-

DO YOU NEED INFORMATION?

HOW TO REACH R.C.V.

R.C.V. is conveniently located in the industrial area of Robassomero, a town on the outskirts of Turin.

Coming from Aosta (A5) and Milan (A4) motorway, take the Turin highway – southward direction, if arriving from the Fréjus (A32), from Piacenza (A21) or from Savona (A6), drive north.

Exit “Venaria – stadio” and turn left at the lights, direction to Lanzo.

Cross the built-up area of Venaria and drive the S.P. (Provincial Road) No. 1 for 8 km approximately, you will run along the perimeter wall of the Regional Parc of “La Mandria”, up to the lights of the industrial area of Robassomero.

Turn right, at the first street turn right again and you will reach Cavour street where R.C.V. is located.